Current Capabilities of Modal Analysis of Aircraft Propeller in ANSYS Mechanical Environment
DOI:
https://doi.org/10.3849/aimt.01160Keywords:
aircraft propeller, ANSYS, CMS, cyclic symmetry, dynamics, FEM, modal analysisAbstract
The article deals with the modal analysis of a small aircraft propeller. In here are discussed the possible three cases of the Finite Element Method (FEM) simulation, in the environment of ANSYS Mechanical software. Successively each of them is described by the theoretical and application parts. Further on, there are explained the important results from the modal analysis, i.e., the calculated natural frequencies, mode shapes, participation factors and effective masses. The following three cases of the FEM simulation were used: the classic approach, the cyclic symmetry modelling and the Component Mode Synthesis (CMS) method. At the end the calculated frequencies of the all three cases are compared.
References
HUJEČEK, Z. Study Modulus No.17 – Aircraft Propellers (in Czech). Brno: CERM, 2004. 96 p.
Anon. Training manual – Dynamics – Release 8.1. Canonsburg: SAS IP, 2004. 150 p.
VYSOKÝ, R. A Contribution to the Coupled Oscillation of a Small Turboprop Engine (in Czech) [PhD Thesis]. Brno: University of Defence, 2015. 104 p.
ANSYS Mechanical APDL Technology Demonstration Guide. Canonsburg: ANSYS Inc., 2013. 654 p.
Anon. ANSYS v7.1 Modal Cyclic Symmetry: Answers to Common Questions. Middlebury: CAE Associates, 2003. 73 p.
Anon. Cyclic Symmetry Analysis. ANSYS 2002 Conference, C. A. Evolution, Mechanics and Simulation Support Development Group, 2003. 26 p.
HEMEZ, F.M. Roy Craig, Engineering Educator and Pioneer Contributor to Component Mode Synthesis. In IMAC Conference, 2003. 12 p.
Anon. Analysis of Large Assemblies Using Component Mode Synthesis (CMS) Technique in ANSYS Workbench and MAPDL – Ask the Experts. Webinar. Canonsburg: ANSYS Inc., 2011.
ANSYS Mechanical APDL Advanced Analysis Guide. Canonsburg: ANSYS Inc., 2013. 414 p.
IMAOKA, S. Component Mode Synthesis in ANSYS Workbench Simulation. ANSYS Advantage, 2007, Vol. I, No. 3, p. 26-27.
JAMES, S. Coupled Rotor-Housing Dynamics Using Component Mode Synthesis. Canonsburg: ANSYS Corporation, 2011. 20 p.
RATH, R. Analysis of Large Assemblies Using Superelements in ANSYS Workbench. Canonsburg: ANSYS Inc., 2013. [cited 2013-09-11]. Available from: .
RIXEN, D. Dynamic Substructuring Concepts – Tutorial. Delft: University of Technology, 2010. 59 p.
THIEFFRY, P. Reduction Techniques, Part 2: Substructuring – Applicability and Examples. Canonsburg: ANSYS Inc., 2012. 22 p.
ZUO, Y. and WANG, J. A Component Mode Synthesis Method for 3-D Finite Element Models of Aero-Engines. Journal of Mechanical Science and Technology, 2015, Vol. 12, No. 29, p. 5157-5166.
Downloads
Published
License
Copyright (c) 2017 Advances in Military Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Users can use, reuse and build upon the material published in the journal for any purpose, even commercially.
How to Cite
