Rationale for the Parameters of Comprehensive Selective Reliability Testing Plans for Single-Use Items
DOI:
https://doi.org/10.3849/aimt.02108Keywords:
selective reliability testing, consumer risk, reliability coefficientAbstract
The article presents a mathematical model for comprehensive reliability testing of single-use items. The model makes it possible to incorporate both prior reliability information obtained from the operational experience of items of the same type and their components, as well as the results of stand-alone tests of the components of single-use items. The application of this model is particularly relevant when assessing the reliability of structurally complex single-use items that have been in service or storage for extended periods.
References
KOVTUNENKO, A.P., V.V. ZUBAREV, B.N. LANETSKIY and A.A. ZVEREV. Mathematical Modeling in Problems of Research of Reliability of a Technical Systems (in Russian). Kyiv: Knizhkove vidavnitstvo NAU, 2006. ISBN 966-598-306-7.
ZUBAREV, V.V., A.P. KOVTUNENKO, A.V. VASILENKO, I.B. CHEPKOV and M.A. SHISHANOV. Foundations of the Theory of Complex Substantiation of Requirements for Technical Indicators of Complex Systems (in Russian). Kyiv: Knizhkove vidavnitstvo NAU, 2010. ISBN 966-2377-11-5.
TOBIAS, P.A. and D.C. TRINDADE. Applied Reliability. 3rd ed. Boca Raton: CRC Press, 2012. ISBN 0-429-18506-5.
COIT, D.W. and E. ZIO. The Evolution of System Reliability Optimization. Reliability Engineering & System Safety, 2019, 192, 106259. https://doi.org/10.1016/j.ress.2018.09.008.
BEICHELT, F. and P. FRANKEN. Reliability and Maintenance-Mathematical Methods (in German). Berlin: Verlag Technik, 1983. ISBN 978-3-446-13906-0.
CUI, L., Y. LI, J. SHENA and L. CONG. Reliability Evaluation Based on a Dependent Two-Stage Failure Process with Competing Failures. Applied Mathematical Modelling, 2018, 64, pp. 699–712. https://doi.org/10.1016/j.apm.2018.07.039.
PRAKS, P., V. KOPUSTINSKAS and M. MASERA. Monte-Carlo-Based Reliability and Vulnerability Assessment of a Natural Gas Transmission System Due to Random Network Component Failures. Sustainable and Resilient Infrastructure, 2017, 2, pp. 97–107. https://doi.org/10.1080/23789689.2017.1294881.
YANG, J., J. CHEN, Y. HUO and Y. LIU. А Novel Cluster-Based Wireless Sensor Network Reliability Model Using the Expectation Maximization Algorithm. Journal of Sensors, 2021, 2021, 8869544. https://doi.org/10.1155/2021/8869544.
TORRES, E.S., S. SRIRAMULA, D. CELEITA and G. RAMOS. Reliability Model and Sensitivity Analysis for Electrical/Electronic/Programmable Electronic Safety-Related Systems. IEEE Transactions on Industry Applications, 2020, 56(4), pp. 3422–3430. https://doi.org/10.1109/TIA.2020.2990583.
MUSCOLINO, G., R. SANTORO and A. SOFI. Reliability Analysis of Structures with Interval Uncertainties under Stationary Stochastic Excitations. Computer Methods Applied Mechanics and Engineering, 2016, 300, pp. 47–69. https://doi.org/10.1016/j.cma.2015.10.023.
DYPTAN, V., P. YABLONSKY, V. KLYMCHUK, O. AVRAMENKO, P. OPENKO and V. POLISHCHUK. Reliability Assessment of Highly Reliable Samples Using the Tolerance Limits and the Weibull’s Law. In: I. OSTROUMOV and M. ZALISKYI (eds). Proceedings of the 2nd International Workshop on Advances in Civil Aviation Systems Development. Cham: Springer, 2024, pp. 310–321. https://doi.org/10.1007/978-3-031-60196-5_23.
NATO, ADMP-01:2014, Guidance for Developing Dependability Requirements.
NATO, ADMP-02:2014, Guidance for Dependability In-Servise.
OPEN’KO, P.V., et al. Reliability and Maintainability Requirements for Mobility Means of Surface-to-Air Missile Systems. Advances in Military Technology, 2020, 15(2), pp. 425–434. https://doi.org/10.3849/aimt.01402.
OPEN’KO, P.V., P.A. DRANNYK, V.V. KOBZEV, M.B. BROVKO and G.S. ZALEVSKY. Substantiation of Reliability Requirements for Mobility Means of Surface-to-Air Missile Systems. Advances in Military Technology, 2017, 12(1), pp. 91–99. https://doi.org/10.3849/aimt.01122.
LANETSKII, B., V. LUKYANCHUK, H. KHUDOV, M. FISUN, O. ZVIERIEV and I. TEREBUHA. Developing the Model of Reliability of a Complex Technical System of Repeated Use with a Complex Operating Mode. Eastern-European Journal of Enterprise Technologies, 2020, 5(4), pp. 55–65. https://doi.org/10.15587/1729-4061.2020.214995.
YABLONSKY, P., et al. The Determination of the Probability of Failure-Free Operation for System Operated in Two Modes. In: I. OSTROUMOV, K. MARAIS and M. ZALISKYI (eds). Proceedings of the 3rd International Workshop on Advances in Civil Aviation Systems Development. Cham: Springer, 2025, pp. 364–375. https://doi.org/10.1007/978-3-031-91992-3_24.
BALAKRISHNAN, N. and E. CASTILLA. Reliability Analysis of Limited Failure One-Shot Devices. IEEE Transactions on Reliability, 2025, 75, pp. 157–170. https://doi.org/10.1109/TR.2025.3635002.
BALAKRISHNAN, N., E. CASTILLA, N. MARTIN and L. PARDO. Robust Inference for One-Shot Device Testing Data Under Weibull Lifetime Model. IEEE Transactions on Reliability, 2019, 69(3), pp. 937–953. https://doi.org/10.1109/TR.2019.2954385.
ZAREI, E., F. KHAN and R. ABBASSI. Importance of Human Reliability in Process Operation: A Critical Analysis. Reliability Engineering & System Safety, 2021, 211, 107607. https://doi.org/10.1016/j.ress.2021.107607.
CHYBOWSKA, D. and S. GUZE. A Multiphase Process Approach to the Analysis of the Reliability and Safety in Maritime Transport Systems. International Journal on Marine Navigation and Safety of Sea Transportation, 2020, 14(4), pp. 985–990. https://doi.org/10.12716/1001.14.04.25.
AMOSOV, A. and O. ROZHDESTVENSKY. Reliability Evaluation Method of Complex Technical Systems Based on Test Results of Disassembled Components. Aerospace Systems, 2023, 6, pp. 335–342. https://doi.org/10.1007/s42401-023-00212-x.
Downloads
Published
License
Copyright (c) 2026 Advances in Military Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Users can use, reuse and build upon the material published in the journal for any purpose, even commercially.


