Experimental and Numerical Validation of an Armor Plate Test Stand
DOI:
https://doi.org/10.3849/aimt.01855Keywords:
blast load testing, protection plate, modelling techniques, numerical simulationsAbstract
Nowadays military vehicles play an integral role in the transportation and protection of personnel and equipment ensuring safe and effective operations. The spectrum of threats ranges from high-velocity projectiles to the dangers posed by improvised explosive devices (IEDs). To evaluate the properties of individual materials, a stand for assessing the performance of vehicle armor plates under diverse condition was developed at the Military Institute of Armored and Automotive Technology (WITPIS). The test platform was designed to carry out multi-variant tests involving blast loading scenarios that impact the combat vehicle's chassis. The prepared testing procedure was proven through a series of tests using the Armox 500 plate. The achieved parameters were validated using a numerical model to confirm the acquired measurements.
References
TSIROGIANNIS, E.C., E. DASKALAKIS, M.H. HASSAN, A.M. OMAR and P. BARTOLO P. Ballistic Design and Testing of a Composite Armour Reinforced by CNTs Suitable for Armoured Vehicles. Defence Technology, 2023, in press. https://doi.org/10.1016/j.dt.2023.04.013.
LENIHAN, D, W. RONAN, P.E. O’DONOGHUE and S.B. LEEN. A Review of the Integrity of Metallic Vehicle Armour to Projectile Attack. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2019; 233(1), pp. 73-94. https://doi.org/10.1177/1464420718759704.
PAI, A., M. RODRIGUEZ-MILLAN, M. BEPPU, B. VALVERDE-MARCOS and S. SHENOY. Experimental Techniques for Performance Evaluation of Shielding Materials and Configurations Subjected to Blast and Ballistic Impacts: A State-of-the-Art Review. Thin-Walled Structures, 2023, 191, 111067. https://doi.org/10.1016/j.tws.2023.111067.
PAI, A., C.R. KINI and S. SHENOY. Development of Materials and Structures for Shielding Applications against Blast and Ballistic Impact: A Detailed Review. Thin-Walled Structures, 2022, 179, 109664. https://doi.org/10.1016/j.tws.2022.109664.
ABEBE, S. and T.A. MOHAMMED. Structures under Synergetic Effects of Combined Blast and Impact Loads: A State-of-the-Art Review. Advances in Civil Engineering, 2022, 2022, 6934078. https://doi.org/10.1155/2022/6934078.
PRATOMO, A.N., S.P. SANTOSA, L. GUNAWAN and I.S. PUTRA. Countermeasures Design and Analysis for Occupant Survivability of an Armored Vehicle Subjected to Blast Load. Journal of Mechanical Science and Technology, 2020, 34, pp. 1893-1899. https://doi.org/10.1007/s12206-020-0411-1.
RYBANSKY, M., M. HUBACEK, J. CAPEK, V. KOVARIK and F. DOHNAL. Terrain Passability Mapping in the Czech Republic. Abstracts of the ICA, 2023, 6(215). https://doi.org/10.5194/ica-abs-6-215-2023.
POKONIECZNY, K. and S. BORKOWSKA. Using High Resolution Spatial Data to Develop Military Maps of Passability. In: Proceedings of the 2019 International Conference on Military Technologies (ICMT). Brno, IEEE, 2019. https://doi.org/10.1109/MILTECHS.2019.8870022.
KARTIKEYA, S., PRASAD and N. BHATNAGAR. Finite Element Simulation of Armor Steel used for Blast Protection. Procedia Structural Integrity, 2019, 14, pp. 514-520. https://doi.org/10.1016/j.prostr.2019.05.066.
SŁAWIŃSKI, G., P. MALESA and M. ŚWIERCZEWSKI. Analysis Regarding the Risk of Injuries of Soldiers Inside a Vehicle during Accidents Caused by Improvised Explosive Devices. Applied Science, 2019, 9(19), 4077. https://doi.org/10.3390/app9194077.
GRZEJDA, R., A. PARUS and K. KWIATKOWSKI. Experimental Studies of an Asymmetric Multi-Bolted Connection under Monotonic Loads. Materials, 2021, 14(9), 2353. https://doi.org/10.3390/ma14092353.
LS-Dyna Manual vol. 1 R.12.0 [online]. [viewed 2023-02-07]. Available from: https://www.dynasupport.com/manuals/ls-dyna-manualsTM 5-855-1 (1986) Fundamentals of protective design for conventional weapons. U.S. Department of the Army, Technical Manual, USA
HILDING, D. Methods for Modelling Air Blast on Structures in LS-Dyna. In: Nordic LS-DYNA Users’ Conference 2016 Gothenburg: DYNAmore Nordic AB, 2016.
SIRIGIRI, V.R.K., V.Y. GUDIGA, U.S. GATTU, G. SUNEESH and K.M. BUDDARAJU. A Review on Johnson Cook Material Model. Materials Today: Proceedings, 2022, 62(6), pp. 3450-3456. https://doi.org/10.1016/j.matpr.2022.04.279.
Downloads
Published
License
Copyright (c) 2024 Advances in Military Technology
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Users can use, reuse and build upon the material published in the journal for any purpose, even commercially.