Beeswax Material: Non-Conventional Solid Fuel for Hybrid Rocket Motors
DOI:
https://doi.org/10.3849/aimt.01256Keywords:
hybrid rocket motor, solid fuel grain, beeswax, combustion, ignition systemAbstract
Traditional solid fuel for Hybrid Rocket Motor (HRM) is characterized as a low regression rate, aiming to develop a new generation of solid fuel material that combines at the same time good ballistic properties, easy manufacture, safe exhaust emission and low cost. Beeswax as bio-derived hydrocarbon fuel has been evaluated to be used as solid fuel in HRM. Firing tests are carried out at the average pre-chamber pressure of 2.90 bar, the oxidizer mass flow rate of 9.34 g/s and the regression rate of 1.5 mm/s at combustion efficiency reaches 60.3 %. Beeswax as pure solid fuel grain at 7 mm active channel port with 100 mm length is tested with gaseous oxygen (gO2) as oxidizer and it showed a regression rate at least three times as high as traditional hybrid propellant, such as Polymethyl methacrylate (PMMA) and Polyethylene (PE)/gO2. This provides a promise for high performance parameters with a special regression rate to overcome the main drawbacks of traditional hybrid propellant. Experimental evaluation parameters (regression rate, fuel mass flow rate and combustion efficiency) are carried out for beeswax/gO2. Combustion shows fairly successful results for lab scale testing but it needs further enhancement, especially in combustion efficiency and theoretical studies for combustion efficiency.
References
SUTTON, G.P. Rocket Propulsion Elements: An Introduction to the Engineering of Rocket. New York: Wiley, 1992. 656 p. ISBN 978-0-471-52938-5.
MAKLED A.EL-S. and AL-TAMIMI, M.K. Hybrid Rocket Motor Performance Parameters: Theoretical and Experimental Evaluation. International Journal of Aerospace and Mechanical Engineering, 2017, vol. 11, no. 1, p. 47-55. ISSN 2393-8609.
KRISHNAN, S. Hybrid rocket technology: An overview. In Proceedings of the 6th Asia Pacific International Symposium on Combustion and Energy Utilization. Kualalumpur: Faculty of Mechanical Engineering, Universiti Teknologi Malaysia Malaysia, 2002, 602 p. ISBN 978-9-835-20244-5.
ALTMAN, D. Hybrid Rocket Development History. In 27th Joint Propulsion Conference, Sacramento, 1991, p. 1-5. https://doi.org/10.2514/6.1991-2515.
MAKLED A.EL-S. and AL-TAMIMI, M.K. Experimental Investigation of Hybrid Rocket Motor: Ignition, Throttling and Re-Ignition Phenomena. International Journal of Aerospace and Mechanical Engineering, 2017, vol. 11, no. 11, p. 2086-2096. ISSN 2393-8609.
KARABEYOGLU, M.A. and CANTWELL, B.J. Combustion of Liquefying Hybrid Propellants: Part 1. Journal of Propulsion and Power, 2002, vol. 18, no. 3, p. 610-620. https://doi.org/10.2514/2.5975.
KARABEYOGLU, M.A. and CANTWELL, B.J. Combustion of Liquefying Hybrid Propellants: Part 2, Journal of Propulsion and Power, 2002, vol. 18, no. 3, p. 621–630. https://doi.org/10.2514/2.5976.
GORDON, S and McBRIDE, B.J. Computer Program for Calculation of Complex Chemical Equilibrium Composition and Application. NASA Reference Publication 1311. [Research Report]. [on-line]. 1994. [cited 2018-05-12]. Available from: https://www.grc.nasa.gov/www/CEAWeb/RP-1311.pdf.
Downloads
Published
License
Copyright (c) 2019 Advances in Military Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Users can use, reuse and build upon the material published in the journal for any purpose, even commercially.
How to Cite
