Detection of Unobserved Ground Targets by Use of Seismic Location Stations
DOI:
https://doi.org/10.3849/aimt.01209Keywords:
bearing angle, computational algorithm, seismic location cells, seismic‐acoustic signal, unobserved targetAbstract
The detection method of moving unobserved ground military heavy trucks is considered in paper. The 3D coordinates detection set and the seismic location method are used in our study. The computational algorithm of determination of the bearing angle and distance to unobserved ground target are presented, the computational uncertainties are estimated. The triangular form of 3D detectors in one seismic location cell is offered. It allows minimizing distance and angle uncertainties in target direction. To improve the detection effectiveness, the optimal geometry disposition of 3D detectors in seismic location cells is determined. The offered method is effective in case of terrain relief where seismic-acoustic signal is propagated by approximately straight line. Therefore, this method can be applied only to homogenous medium, for example, to mountainous, solid rocky soil.
References
HASHIMOV, E.G., BAYRAMOV, A.A. and KHALILOV, B.M. Terrain Orthophotomap Making and Combat Control. In Proceeding of International Conf. “Modern Call of Security and Defence”. Sofia: Georgi Rakovski Military Academy, 2017, vol. 1, p. 68-71.
HASHIMOV, E.G. and BAYRAMOV, A.A. Detection Unobserved Moving Armored Vehicles by Seismic Method (in Azerbaijani). National Security and Military Sciences, 2015, vol. 1, no. 1, p. 128-132.
HASHIMOV, E.G. and BAYRAMOV, A.A. Seismic Location Station for Detection of Unobserved Moving Military Machineries. Military and Information Sciences, 2016, vol. 4, no. 2, p. 61-66. https://doi.org/10.17858/jmisci.82365.
PANFILOV, А.K., KUZMENKO, I.V. and SISOYEV, S.N. Identification in Seismoacoustic Detection Systems (in Russian). New Technologies, 2010, vol. 4, p. 54-59.
JIN, X., SARKAR, S., RAY, A., GUPTA, S. and DAMARLA, T. Target Detection and Classification Using Seismic and PIR Sensors. IEEE Sensors Journal, 2012, vol. 12, no. 6, p.1709-1718. https://doi.org/10.1109/JSEN.2011.2177257.
PAKHOMOV, A. and GOLDBURT, T. Seismic Systems for Unconventional Target Detection and Identification. Sensors, and Command, Control, Communications, and Intelligence (C3I) Technologies for Homeland Security and Homeland Defense V, 2006, vol. 6201, 2011I-1. https://doi.org/10.1117/12.668930.
CRESS D.H. Seismic Methods of Locating Military Ground Targets. Miscellaneous paper M-76-13. Vicksburg (MS): U.S. Army Engineer Waterways Experiment Station, 1976. 73 p.
GARCIA, M.L. Design and Evaluation of Physical Protection Systems. 2nd Edition. Oxford: Butterworth‐Heinemann, 2008. 370 p. ISBN 978-0-7506-8352-4.
YANCHICH, V.V. Piezoelectric Sensors of Vibrational and Shock Acceleration (in Russian). Rostov‐na‐Donu, South Federal University, 2008. 77 p.
HASHIMOV, E.G., BAYRAMOV A.A. and SABZIEV E.N. Determination of the Bearing Angle of Unobserved Ground Targets by Use of Seismic Location Cells. In IEEE Proceeding of the International Conference on Military Technologies (ICMT). Brno, 2017, p. 185-188. https://doi.org/10.1109/MILTECHS.2017.7988753.
KERIMOV, M.K., KURBANOV, M.A., BAYRAMOV, A.A. and MAMEDOV, A.I. Matrix Active Micro- and Nanocomposites Based on the Polymer, Semiconductive and Ferropiezoceramic Materials. In Nanocomposites and Polymers with Analytical Methods. Rijeka: InTech, 2011, p. 375-404. ISBN 978-953-307-352-1.
SIAUDINYTE, L. and GRATTAN, K.T.V. Uncertainty evaluation of trigonometric method for vertical angle calibration of the total station instrument. Measurement, 2016, vol. 86, p. 276-282. https://doi.org/10.1016/j.measurement.2015.10.037
Downloads
Published
License
Copyright (c) 2019 Advances in Military Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Users can use, reuse and build upon the material published in the journal for any purpose, even commercially.
