Adhesive Composites in Repairing Weapon Systems
DOI:
https://doi.org/10.3849/aimt.01138Keywords:
adhesive composites, field repairs, strength, durability, methodology of adhesives selectionAbstract
The article presents the classification and application areas of adhesives while repairing weapon systems, research on adhesive materials’ durability, research on mechanical and strength properties of adhesive composites, research on durability of adhesive composites and methodology of their selection for expedient (temporary) repair in the field. The conducted research indicates certain constraints concerning the application of the examined adhesive materials. Consequently, any repairs provided with the use of adhesives should be in most cases only of temporary nature so that certain damage can be fixed quickly but only for a time of the particular task. It seems that the obtained research results, introduce issues of effective and efficient organization of the mentioned type of repair.
References
CYPHERS,D. Battle Damage Assessment and Repair (BDAR) Capability Im-provement Program. Aircraft Survivability 2007, No. Summer, p. 9-11. [cited 2009-05-12]. Available from: <https://jaspo.wpafb.af.mil/>.
GODZIMIRSKI,J.et al.Epoxy adhesives. An application in repairs of machines and equipment(In Polish). Warsaw: WNT, 2010.
FICOŃ,K. Operational logistics(In Polish). Warsaw:BEL Studio Sp. z o.o., 2004.
FM 4-30.31 (FM 9-43-2): 2006, Recovery and Battle Damage Assessment and Repair.
DAVIS, M. J.and BOND,D. Principles and practices of adhesive bonded struc-tural joints and repairs. International Journal of Adhesion & Adhesives, 1999, no. 19, p. 91-105.
STANAG 2418: 2009, Procedures for expedient repair, including battle damage repair.
DA SILVA,LFM.,ÖCHSNER A. and ADAMS RD. (Eds). Handbook of Adhe-sion Technology. Berlin: Springer 2011.
KINLOCH, AJ. Adhesion and Adhesives: Science and Technology. London: Chapman and Hall, 1987.
Information and repair catalogues of products: Belzona, Chester Metal, Unirep.
SMAL,T. and FURCH,J. Expedient Repairs –Analysis of Possibilities and Needs. Advanced in Military Technology, 2011, vol. 6, no. 2.
DAVIS M. J. A call minimum standards in design and application technology for bonded structural repairs. In Proceedings of International Conference entitled: Composite Repair of Aircraft Structures.Vancouver, 1995, p. 4-15.
ROŚKOWICZ,M. and SMAL,T. Numerical –experimental analysis of durabil-ity of adhesive joints loaded in raised temperature conditions. Problems of Machines Operation and Maintenance, 2008, vol. 43, no. 1(153), p. 73-87.
SMAL,T. Strength of glue joint aged in natural climatic conditions (In Polish). Bulletin of the Military University of Technology, 2005, no. 5-6(633-634), p.121-127.
SMAL,T. Methodology of assessment of adhesive composites’ properties. Polymers2013, no. 1, p. 114-120.
GODZIMIRSKI,J. and SMAL,T. Research on possibilities of making repairs with use adhesive materials (In Polish). Problems of Machines Operation and Maintenance, 2000, vol. 35, no. 4(124), p. 199-212.
BRONIEWSKI,T., KAPKO,J., PŁACZEK,W. and THOMALA,J. Research methods and estimation of properties of synthetic materials(In Polish). Warsaw: WNT, 2000.
GODZIMIRSKI,J. Short-term strength of structural adhesive joints(In Polish). Warsaw: WNT, 2002.
GODZIMIRSKI,J. (Eds.). Strength of adhesive joints(In Polish). Warsaw:Military University of Technology, 2009.
KUCZMASZEWSKI,J. Fundamentals of metal-metal adhesive joints design. Lublin University of Technology. Lublin: Polish Academy of Science, 2006.
GODZIMIRSKI,J., KOMOREK,A. and SMAL,T. Research of strength features of adhesive composites (In Polish). Maintenance Problems of Machines, 2007, no. 1(64), p. 157-165.
GODZIMIRSKI,J. and TKACZUK,S. Numerical modeling of adhesive bonds (In Polish). Mechanical Review, 2005, no. 9, p. 32-35.
MESSLER,RW. Joining of Materials and Structures. Oxford: Elsevier Incorpo-ration, 2004.
SMAL,T. Research on strength properties of composite adhesives in connection to period of their storage (In Polish). Technology and Assembly Automation, 2004, no. 3,4(45,46), p. 101-103.
MESHGINA,P., CHOIB,KK.andREDA TAHA,MM. Experimental and analytical investigations of creep of epoxy adhesive at the concrete–FRP inter-faces. International Journal of Adhesion and Adhesives, 2009, no. 29.
ROŚKOWICZ,M. Long-lasting strength of adhesive bonds(In Polish)[PhD Thesis], Warsaw: Military Academy of Technology, 2004.
SMAL,T. and ROŚKOWICZ,M. Experimental and numerical analysis of adhe-sive composite long-lasting strength (In Polish) [Research Report]. Wroclaw: The gen. Tadeusz Kosciuszko Military Academy of Land Forces, 2006.
ROŚKOWICZ,M. and SMAL,T. Determination of creep curves and long-term strength of adhesive joints (In Polish). Technology and Assembly Automation, 2007, no. 2,3(56,57),p. 120-123.
ROŚKOWICZ,M. and SMAL,T. Modification influence of adhesive layer on static long-lasting life of adhesive joint (In Polish). Technology and Assembly Automation, 2006, no. 2(52), p. 51-54.
ROŚKOWICZ,M. and SMAL,T. Static long-lasting life of adhesive composite in shear loaded joints (In Polish). Technology and Assembly Automation, 2007, no. 2, 3 (56,57), p. 112-115.
GODZIMIRSKI,J. and SMAL,T. Possibilities of adhesive joints executing with use of composite adhesives (In Polish). Technology and Assembly Automation, 2000, no. 3(29), p. 18-23.
Downloads
Published
License
Copyright (c) 2016 Advances in Military Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Users can use, reuse and build upon the material published in the journal for any purpose, even commercially.
How to Cite
